During the production of iron scrap briquetting machines, many customers report that the strength of the formed cake is not high and it breaks during the stacking or sintering process. After troubleshooting the equipment, we recommend several ways to improve the strength of iron powder briquettes, which we hope will help you improve.How to improve the briquetting strength of scrap iron chips briquetting machines?

Scrap iron chips briquetting
Scrap Iron Chips Briquetting

What are the factors affecting the briquetting strength?

 In the process of iron powder briquetting production, the equipment pressure, raw material ratio, production process, and other factors directly affect the strength of the formed cake. Iron powder briquetting is divided into cold pressing and hot pressing, cold pressing strength is low; adding a certain proportion of binder in raw materials, too much will affect product quality, too little will lead to non-forming; in the case of not exceeding the rated pressure, the equipment pressure can be adjusted appropriately according to the actual situation.

Scrap iron chips briquetting
Scrap Iron Chips Briquetting

How do we improve the scrap iron chips briquetting machines’ briquetting strength?

Scrap iron chips briquetting
Scrap Iron Chips Briquetting

1, the larger the general model of the scrap iron briquetting machine briquetting strength, then you can pick a large number of machines when you buy the machine

 2, starting with raw materials, according to the actual situation, choose a reasonable proportion of raw materials or replace the adhesive.

 3, according to the molding density and strength, a reasonable choice of the production process. Generally speaking, the hot pressing forming strength is higher, but the requirements of the scrap iron briquetting machine are higher, and other auxiliary equipment is required.

The role of scrap iron chips briquetting machines

Scrap iron chips briquetting
Scrap Iron Chips Briquetting

It is widely used in aluminum alloy profile factories, steel casting factories, aluminum casting factories, and copper casting factories. Aluminum scrap, steel scrap, iron scrap, and copper scrap are pressed back into the furnace instead of steel scrap, pig iron, aluminum ingots, and copper scrap as raw materials, which can reduce the burning loss. We improve the performance of the equipment by maintaining and servicing the scrap iron briquetting machine so as to achieve the effect of improving the strength of iron powder molding. This method is applicable to the situation when the performance and effect of the equipment are low after use for a period of time.