The scrap metal shear machine is mainly suitable for cutting steel plates, copper plates, nickel-plated, and other metal plates. The scrap metal shear machines are driven by hydraulics. Compared with the mechanical transmission shears, they have the characteristics of small size, lightweight, low motion inertia, low noise, stable motion, flexible operation, and large shearing section. The scrap metal shear machine is controlled by hydraulic and electric integration, which can realize single and continuous action conversion, is simple and convenient to use, can stop and run at any working position, and is easy to realize overload protection. It can be used in a wide range of applications, not only as processing equipment for metal recycling and processing units but also as furnace charge processing in factory foundries and metal shearing processing equipment in mechanical construction industries.
The scope of application of the metal shear machine
The scrap metal shear machine is suitable for metal recycling, using processing plants, scrapped car dismantling yards, and renewable resource recycling industries. Iron sheet, TV case, angle steel, channel steel, metal, iron sheet, cast iron, thin iron, thin iron sheet, light and thin material, steel, color steel tile, scrap steel, scrap iron, aluminum alloy, channel steel, angle steel, angle iron, copper plate, Sheet metal, aluminum profile, steel scrap, aluminum plate, iron plate, steel plate, round steel, scrap metal. The gantry shearing machine is a kind of equipment suitable for the shearing of heavy scrap steel.
Tips for using hydraulic scrap metal cutting machine
1. The thickness of the sheared steel plate shall not exceed the performance of the gantry shear. The workpiece must be compacted when shearing. When the scrap metal shear machine cuts narrow steel plates, when the vertical pressure device in front of the gantry shears is not available, another steel plate should be pressed on the steel plate to be shared, so that the vertical pressure device will press the plate firmly when it falls, so as not to be damaged during shearing. The sheared steel plate lifts up and damages the machine tool.
2. The person who operates the switch must wait for the line watcher to give the cut-off signal before driving; when the gantry shearing machine is feeding, it must wait for the upper scissors to stop before feeding. Feeders and line watchers are not allowed to put their hands inside the vertical pressure device.
3. The steel plates cut by the gantry shearing machine should be transported away at any time and stacked neatly according to the specifications. Leftovers should be placed in the specified place